...jam message will not go away for my brother MFC-240C printer Usually small pieces of paper are jammed at the print head area. Lift up the scanner and see if you can find the paper at the print head ...
Question about Brother MFC Office Equipment & Supplies
...Jam Clear Cover. The top of the cover has a slotted opening in the center approximately 1/4 inch wide. Hold the cover by the plastic tabs located in the front of the cover on the right and left side ...
...Jam, clear scanner. There is no jam I have cleaned the scanner and removed the back piece as though I was clearing a jam and replaced it but still getting the error message There are 2 black sensor ...
unable to print 70 Open the Outer Back(Rear) Cover (1) at the back of the machine. Pull the jammed paper out of the machine. Close the Inner Back(Rear) Cover (1) if it is open as shown in the ...
Question about Brother MFC Office Equipment & Supplies
...scanner..." a sensor felt out as a result of removing the paper. How do I remove the ADF mechanism to reattach the sensor. I get persistent error messages saying document jam clear scanner and there ...
how do I remove a document jam? document jammed It could be a false positive for the paper jam. Check and make sure all of your sencer flags in the paper path are working properly.
...removing power; see later. Pull out the paper tray from the front and check for paper jams or torn paper anywhere inside the machine. Also check the 'jam clear screen' at the back of the printer. ...
scanner open contact (opposite to the menu button) and watch the printhead run to the left side. It might be that either the printhead stucks somewhere on its way (press the cover of the printhead. It
...scanner but there is no jam to clear. what am i missing? how can i fix it? try removing the back door where you are supposed to clear a paper jam from, and then replace it. If that does not work try ...
...jam and clear the scanner then press stop key..... Hi There must still be a piece of paper in the machine check the fuser section at the rear of the machine maybe be piece there or check at the paper ...
223 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
406 Questions