Brother DCP-7020 All-In-One Laser Printer "touch remove backing" Questions

...touch the feed roller. 3. Remove the paper tray feeder from the front and look inside for bits of paper and check the paper is flat in the tray. 4. Replace tray and back cover and all should be fine. ...

...remove paper jam I have same problem, the message make me wonder. I am very sure there is no paper tears in the printer. But then i have the answer from internet. I hope this answer can solve your ...

...to the machine, your desk it is on and possably the carpet, curtains and anything even close to touching the machine and subsequent items being touched by the machine. Ink on a non-porous

...to the machine, your desk it is on and possably the carpet, curtains and anything even close to touching the machine and subsequent items being touched by the machine. Ink on a non-porous

...Remove and re-insert the cable connected to the touch screen and also try to calibrate the touch screen. The panel can be removed with ease. If not the touch panel needs to be replaced. DO NOT FORGET ...

...remove the left catridge....turn off the printer... then using a cloth or cotton lightly moistened with alcohol or water, clean the surface of electrical contacts of the catridge(do not try to touch ...

Spontaneously doesn't recognise colour ink cartridge despite not touching it. Comes up with same problem if catridge is removed and replaced or removed completely. it is preventing me printing in ...

...the paper and damaging the print mechanism, pull paper from the product slowly and gently. Avoid touching the internal components of the product. Disconnect the power cord from the back of the ...

...remove the tape from the back and bottom of the color cartridge, insert the cartridge in the right carrier, and then close the color cartridge carrier lid. Warning-Potential Damage: Do not touch the ...

...touch the shaded parts shown below.Remove the paper tray from the printer.Pull the jammed paper up and out of the printer.Open the front cover.Pull out the drum unit and toner cartridge assembly ...