...some one said to change the fuser. where do you get it and did this work for mdmckinnon Eject sensor actuator is too short or the main board is defective Recommendation: Either the eject sensor ...
PAPER JAM CHANGE UNABLE 34 NO PAPER IS JAMMED HAVE LOOKED MAKES A CLACKING NOISE WHEN TRYING TO PRINT ? Usually when it does that, either there is just a small piece of shredded paper still jammed in ...
Question about Brother DCP Office Equipment & Supplies
...problem error code Unable to Init 50 hi good day! the printer is error 50 due to a paper or some sensor error.. open the printer, or dismantle, clean the sensor and wash the pump of water and ...
Question about Brother DCP Office Equipment & Supplies
...is clean. There is a black guide plate that opens partially when you open the back door, there's a sensor flag on that cover that goes thru the right side to a sensor, the arm on the guide needs to ...
Question about Brother DCP Office Equipment & Supplies
...get a back cover open message. Close the cover and the message goes away. Any suggestions? Eject sensor actuator is too short or the main board is defective Recommendation: Either the eject sensor ...
Question about Brother DCP Office Equipment & Supplies
...the message, open and close the top most cover of the printer. Lastly, verify the flags and the sensors. If the problem persists, the cause of the error message could be a broken sensor or sensor ...
UN ABLE TO CLEAN 50 paper jam, or some sensor error, clean the sensor under the pump, to clear the error.
Question about Brother DCP Office Equipment & Supplies
...the message, open and close the top most cover of the printer. Lastly, verify the flags and the sensors. If the problem persists, the cause of the error message could be a broken sensor or sensor ...
ink cover is open sensor is unlock, locate the sensor to close the sensor
311 questions posted
Usually answered in minutes!
422 Questions
374 Questions
395 Questions
245 Questions
120 Questions