Question about Brother HL Office Equipment & Supplies
Red light stays on and will not print The red light stays on. When it turn the printer off and back on, the green light comes on and then turns red. there is a second piece of paper stuck in the ...
Question about Brother HL Office Equipment & Supplies
...light stays red and it won't print. When I first turned it on all the light flashed green as usual but then in made a screetching noise and the tone and status lights came on and stayed on. Any ideas ...
Question about Brother HL Office Equipment & Supplies
...red light stays on. If your printer have no paper jam inside and paper tray has paper in it, then you need to replace toner cartridge. brother hl1440 red light steady and yellow paper light ...
Question about Brother HL Office Equipment & Supplies
light is red I'm trying to print labels and the alarm light is red and the data light is green. When I press the reset button the ready light does not stay lit. Please help. Because I was getting gray
...Red light The green and red lights stay blinking. Does not print. Tried the solution by "foot loose." The solution did not work. Help is appreciated. Misfeed:Put the paper back in properly, and then ...
...red light indicating no paper is on and the printer won't print It appears as though 1 piece of paper is jammed in the roller, though there could be more below that I cannot see. I have opened the ...
Question about Brother HL Office Equipment & Supplies
...light GOes red 8. Close door and you're all set I been having the same problem recently & tried every available method...The i read this on another website and thought I must share with ...
...it out and it should clear your red light. When clearing paper jams, clear the front first, and then if the red light is still on, you need to check the back hidden door for another piece of
Question about Brother HL Office Equipment & Supplies
...light is red after replacing toner cartridge. Toner light comes on and status light is red after replacing toner cartridge I know this is an ancient thread, but here is my solution to this problem: ...
...and hold GO and turn power on 4. When all 3 lights lit release and press GO twice 5. All lights turn solid 6. With all solid, press GO 5 times 7. Ready light GOes red 8. Close door and you're all ...
553 questions posted
Usually answered in minutes!
1,072 Questions
495 Questions
377 Questions
249 Questions
188 Questions