Question about Brother MFC Office Equipment & Supplies
...menu set scroll down to easy receive click menu set if you follrwed the directions you should have no problem providing there is dial tone on that line. check with a phone and good luck brother sr ...
Question about Brother MFC Office Equipment & Supplies
...phone, call your fax. Listen on the cell for a busy signal, fax tones, dial tone, etc. If the fax does not answer the cell, check the following: make sure the phone line is plugged into the LINE jack ...
...dial tone. I know that's not true because I have my phone line plugged directly into the brother mfc 5840cn with another phone line coming out of it into an extension phone. I have double checked my ...
...dial tone. I know that's not true because I have my phone line plugged directly into the brother mfc 5840cn with another phone line coming out of it into an extension phone. I have double checked my ...
Question about Brother MFC Office Equipment & Supplies
...dial tone but cannot receive calls? You do need the disk if u want to print or scan. For the phone or fax features you just need to make sure you have the cables plugged in properly and have set the ...
phone number to fax to and listen for the dial tone. If you get a dial tone, then you have set it up correctly. On the fax machine look for the button that says "menu". Push it and use the up and down
dial tone, use a single line phone (corded) to listen for a dial tone at that jack. If there is no dial tone, check the incoming service for a dial tone. (If you have no dial tone at all, contact your
...dial your sending fax number in 4521 after number dialing pull the phone handset to ear when you leason fax tone from the dialing number press start button to send fax. for incoming fax (in not ...
Question about Brother MFC Office Equipment & Supplies
...will need to either manually receive incoming faxes (by changing the setting to "Manual"), or you will need to at least spring for a separate phone number with a distinctive ring for incoming
...phone lines too. Now I cannot receive or send a fax. There is a dial tone, and the fax does ring for incoming calls, but it does not receive any information. There is no setting to make this work, ...
496 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
381 Questions