Question about Brother MFC Office Equipment & Supplies
...printer won't print. It says that the Cyan ink cartridge is empty, but I've just checked and it still has ink in it. What should I do? Your cyan ink catridge has been faulty. so pls replace
...ink on yellow and magenta while still printing Black and white and Cyan. Now Black is OK and only Cyan is OK. I have run the cleaining cycle 20 times with no change. I have tried new full non-OEM ...
...ink on yellow and magenta while still printing Black and white and Cyan. Now Black is OK and only Cyan is OK. I have run the cleaining cycle 20 times with no change. I have tried new full non-OEM ...
Question about Brother MFC Office Equipment & Supplies
...ink empty error message for cyan and yellow. I have removed and reinstalled atleast 20 times, unplugged the unit etc. etc. and I am still receiving the error message. Is there anything else I can do ...
...ink. I swabbed the cyan sensors with the alcohol until they were clean (maybe 20 Q-tips all total). I carefully dried the area with the Q-tips and let the alcohol evaporate for a minute then ...
Question about Brother MFC Office Equipment & Supplies
ink catridge in it, that was working fine, until...it suddenly did not recognise the cartridge anymore. I pulled the machine apart and found that 2 of the 4 sensors on the cct board at the back of the
...ink empty; cyan near empty; magenta nr empty; blue nr empty; yellow nr empty, even though I have put new full catridges in. I have tried turning it off and on, taking them out, putting them back in, ...
...catridge door, removed the Cyan cart,used a long piece of paper to block the sensor, then used something to push the cartridge door sensor to think it was closed. This then brought the machine alive ...
...catridge and try it. Let me know the result also for further assistance. Try out the following:.... 1. Perform the print head cleaning procedure 2. Print head alignment instructions 3. The Print Head ...
Question about Brother MFC Office Equipment & Supplies
...catridge is empty or dried up. Replace or refill. 4. If the ink is normal, then use some toilet tissue to wipe the gold contact points clean. If this fails to solve your problem, take it to your ...
496 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
381 Questions
