...jam occurs when feeding from either the paper tray or manuel feed. Please help. from fixya knowledge base I found this solution 1. Power Unit off 2. Open front cover 3. Press and hold GO and turn ...
jam Try: 1. Power Unit off 2. Open front cover 3. Press and hold GO and turn power on 4. When all 3 lights lit release and press GO twice 5. All lights turn solid 6. With all solid, press GO 5 times 7
jam. Toner & drum new. Having messed with for 2 days now can not figure it out. Was working on desktop previously and stoped working when set up to network. Just tried new laptop running vista and
...press GO twice 5. All lights turn solid 6. With all solid, press GO 5 times 7. Ready light GOes red 8. Close door and you're all set Let know if working and do not forget to rate this solution. ...
...jam up against the drum causing it to stop turning. It gets jammed up on the back end of the drum. The doctor blade is set to wide. The brush on the magnetic roller should be solid but not
Question about Brother HL Office Equipment & Supplies
...jam light was solid, I took the paper tray out and tried a tray from another machine and it worked the first time. I looked at the original paper tray and manually release the spring clasp on the ...
...jam light is solid or printer shows paper out light solid all the time, Then try these suggeted steps: Take the Tray 2 out and check if all the paper guides are moving freely if they are than remove ...
...jam is at the exit where your grab the paper. If you can tell me what i can do to fix it that would be great. in your paper tray can you check please if it is set correctly, also the paper that your ...
set the paper straight before it is fed Follow this: Isolate the jam by determining where it is occurring. This sounds much easier than it looks because a jam can be caused by more than one thing, and
1,323 questions posted
Usually answered in minutes!
495 Questions
422 Questions
377 Questions
249 Questions
188 Questions
