Brother HL-2040 Laser Printer "drum error" Questions

...error message "Replace Drum", "Drum End Soon", "Drum Near End", or "Drum Stop" after I replace the drum unit with a new one. I still receive the error message "Replace Drum", "Drum End ...

Error light and Drum light are blinking. Do I Error light and Drum light are blinking. Do I need a new drum? Blinking says to replace drum soon, when it's on solid, it's time for a new drum...

...DRUM ERROR PRINTER GIVES DRUM ERROR AND WONT PRINT ANYTHING The drum unit needs to be replaced as it has reached maximum prints for the drum. The drum unit is the carriage part that the toner unit ...

Drum error- Slide green tab on drum unit in each color. Drum error. wont allow printing. replace the drum unit

error drum or drum light on and off. what do I do? The Drum LED alternates on and off, turning on for 2 seconds and off for 3 seconds,and the Ready LED is on. the LED lights indicate the drum unit is ...

Drum Unit Error Message reads: Drum error. Slide the green tab on drum unit in each color. Refer to user's guide for the procedure. The green tabs that you have to slide are under the color cartridges

drum error put in new toner...don't even know what part is the "drum" and it shows "drum error". Hi, the drum is the part where you insert the new cartridge toner, some times when you replace the ...

Drum Error Light My Brother HL-2040 Printer is printing very light and the drum error light is on. How do I repair this? Thanks, Lainie Yes, the DRUM UNIT has reached the end of its life and must be ...

drum and error light The drum unit has exceeded its programmed life. You can either rplace teh drum unit with a new one or if the print quality is still ok and paper jams have not been a problem, you ...

drum error light is on For the error you described however you would need to check and clean the contacts for the drum on the left side of the inside of the machine. if it's a drum life error then you