...light flasing and wont print. New toner and new drum just installed now wont print at all. I found this solution on the web-- Hope it helps. The HL-2070N gets stuck in a toner end-of-life error ...
Question about Brother HL Office Equipment & Supplies
...LED's will light up and then the STATUS LED will turn off. Release the GO button and the LED's will turn off. Press the GO button six times. Make sure that all the LED's light up to indicate the ...
...light doesnt go away in our printer and the printer doesnt print. We changed the cartridge please help us The HL-2070N gets jammed in a toner end-of-life error condition. Perform the following to ...
light was flashes and I have replaced the drum kit and toner cartridge. Brother Drum Reset Instructions The Drum LED continues to blink if the drum counter was not reset when you replaced the drum. To
...LED's will light up and then 3. Once the 3 LED's are lit, release the GO button Press the GO button 2 times. This will cause the LED's to light solid With the LED's lit solid, press the GO button 5 ...
...a error message and witch light / led is on? Please follow this link: There is details of your printer error messages and their solutions. If any doubt or stuck any where please Ask Me. Thanks ...
Question about Brother HL Office Equipment & Supplies
2070N began flashing. I opened all the accesses and found no more paper. I checked the toner and paper size and everything seems fine. I powered it down. Upon powering up it imediately goes to default
all four lights flash continually on Brother 2070n printer If there is an error that cannot be cleared by the user, the printer will show that a service call is needed by lighting up all the LEDs as ...
All leds are flashing try to reset the printer - Machine off - Front cover OPEN - Switch on the machine while holding down the ?GO? button - Check that the TONER/DRUM/PAPER leds are lighted - Release ...
HL-2035 ALL Leds light up solid Hi! When the printer is turned ON, all Leds light up solid Cant remove them and obvioulsy cant print Anychance to fix this problem? Try resetting the printer. ...
1,323 questions posted
Usually answered in minutes!
495 Questions
422 Questions
377 Questions
249 Questions
188 Questions
