Question about Brother HL Office Equipment & Supplies
how to slove marks on paper left side hi your printer has problem with tonner drum just tak out toner you will see your toner drum has linse just change that it will work fine
Question about Brother HL Office Equipment & Supplies
...Take the cartridge out and drum unit and check if you can see a large build up of toner to the left or right side of the cartridge and drum unit. You can take a picture of the unit and post ...
Question about Brother HL Office Equipment & Supplies
...left side of paper If there is not repeating pattern then it could be either the drum unit or toner cartridge. Most likely cause in these Brother printers is the drum unit. If you have a spare unit ...
Question about Brother HL Office Equipment & Supplies
...left on the paper. New drums and new toner.Already cleaned photosensitive roller, got a little better but needs much improvement.. If there is still some kind of residue on the paper. Take the toner ...
...left side of every sheet I print. they are equally spread apart. it seems like every time the roller his the paper (3/4 in round) in the same spot, a smudge appears? Your Drum Cylinder has a scratch ...
Question about Brother HL Office Equipment & Supplies
...Printers. 2. Double-click the Brother printer to open the print queue. If print jobs are listed in the printer queue, click Printer (at the top of the window) and click Cancel All Documents to delete ...
...left side. Fill in any clear areas, except for the actual sensor mark, with a "sharpie" pen. This worked for me. I solved this problem by turn sensor on 180 degree. This sensor located near to ...
left hand side of the paper and now there has been black smears with each print. I changed the printer cartridge to see if that would help, There are still dots and the smears are more consistent. How
Question about Brother HL Office Equipment & Supplies
left side of pate If the problem just started when you put a new toner cartridge in the machine, the cartridge is probably defective. Bring it back to where you purchased it from, explain your problem
left to right and back several times to clean the corona wire then return the tab to the home position (marked by an up arrow). Slide the drum assembly back into the printer and close the front cover.
70 questions posted
Usually answered in minutes!
1,072 Questions
495 Questions
422 Questions
377 Questions
249 Questions