Brother MFC 420CN All-In-One InkJet Printer "stuck pause help" Questions

...stuck the straw into the printer, around the ink spout and up against the back of that to make a seal and just blew with my mouth a few times. Its working now. the bike pump idea is where I got the ...

pause printing and cancel all documents. I chose the cancel all documents. The status of that particular document is: deleting- printing. I am now trying to pint another document and the computer does

...PAUSE issue but try going through and see if anything is it. On the printer icon on the bottom right of your task bar, right click on the printer icon and see if you can select CANCEL print job, then ...

...stuck and will not delete from printing. I am not sure how to get rid of it???? I would apprciate some help on thisone. thanks If you restart your computer it should come back up with a message about ...

stuck in offline mode Click Start and then go to Printers and Faxes (XP), Printers(Vista), Devices and Printers(Win 7) 1. Right Click on your printer Icon 2. Click Open or See What's Printing 3. Click

...stuck to a card, pull the ribbon or overlaminate off the card and throw the card away. If it is jammed underneath the rollers, press and hold down the printer?s Pause/Resume button as you gently pull ...

...stuck to a card, pull the ribbon or overlaminate off the card and throw the card away. If it is jammed underneath the rollers, press and hold down the printer?s Pause/Resume button as you gently pull ...

...stuck in a toner end-of-life error condition. Perform the following to clear : With paper loaded, new toner in, Open front door Turn off printer While holding down the GO button, turn printer back on ...

...stuck inside, or cartridges not well placed, cartridge sensor dirty, or an internal fault. Remove both cartridges. Unplug printer powe cord and usb cable. Wait ten minutes and plug back power. After ...

...stuck after about a 1/2 a page and all 4 lights begin to flash. I tried opening the door, turning it off, holding down the GO button, pushing it two times, pausing, then pushing GO five times, tried ...