Brother MFC 420CN All-In-One InkJet Printer "initiate cleaning cycle" Questions

Black ink not working; but colors are Black ink not working but all colors are. I Two new refilled cartridges used but neither worked. Initially it worked somewhat when the test print was run, but it ...

Changing ink cartridges The printer said I was out of Magenta...so I replaced the cartridge. After replacing it asks "Did you replace Magenta?" I said "yes". Now it says "No Cartridge. Open scanner ...

cycle many times. No error messages just blank paper. I have a brother MFC 3240C. My Black ink stopped printing(initially printed horizontal faded lines and gradually got worse), the other colors were

Brother 420CN printer will not print black ink. Have replaced the cartridge and after several cleaning cycles, it still will not print properly. Test Print shows colors are fine but black ink is hit ...

I changed all Print cartridges-Black, Yellow,Cyan,Blue I changed all Print cartridges-Black, Yellow, Cyan, Blue; However, after printing, the indicator states "low yellow".Also, the Black print ...

Finally it did a cleaning cycle, which seems to be the trick that fixed it. Like I say, No expert, not even sure if you can initiate a cleaning cycle manually! couldn't find it in html owner's manual

My printer won't print. I replaced the black ink cartridge and the printer sends a cleaning message. When I push the copy and black start button, the paper goes in, the head goes back and forth, but ...

...cleaning cycle.    * The first print job after a paper jam has been cleared: The Brother machine will automatically clean the print head to remove paper dust which can damage the print ...

...cleaning cycle. In 2# case: Insert full carts well. press menu then start mono (blue) then fourtimes arrow-up (te-index). machine will be in maintenance mode. press 7 then 6 then ...

Black ink not working; but colors are Black ink not working but all colors are. I Two new refilled cartridges used but neither worked. Initially it worked somewhat when the test print was run, but it ...