Question about Brother MFC Office Equipment & Supplies
...I have the 420cn. prior to this had the 420 it did the same problem with the black and I got so fed up just threw it out. It is definitely a sensor problem with the brother's all in one printers. ...
Question about Brother MFC Office Equipment & Supplies
...two and then replugging? (Hard Reset) 4) Do you get any error message on your screen? 5) Is paper fed into paper tray and pushed all of the way back? 6) What if any error message do you get on the ...
Question about Zebra Office Equipment & Supplies
...or re-calibrate. To adjust sensor: Open up the printer where you put the label, where the paper is fed there is are two green levers, one that helps guide the paper (media guide) which is adjustable ...
...normally print out an "Internal Epson Self-Test Copy" and the self-test copy should be correctly fed thru the printer...AS A GENERAL RULE: If the self-test page prints out correctly, then usually ...
Question about Brother MFC Office Equipment & Supplies
...it has been my proviledge to use since the early 80's. I have used their dot matrix and tractor fed devices up to and including ink jet devices (both home and business). I have a Epson printer in ...
...the white power connector for the scanner lamps. Now, make sure the white scanner lamp wires are fed into the mirror container properly so they are not being pinched by the cover and so they are ...
...the white power connector for the scanner lamps. Now, make sure the white scanner lamp wires are fed into the mirror container properly so they are not being pinched by the cover and so they are ...
what does P mean P for powder :) need new toner!! P stands for paper out. There is a symbol for toner. Either the feeder is not feeding it or the paper is not hitting the sensor as it is fed through.
Question about Office Equipment & Supplies
My NP6012 stops and paperjam light comes on. Paper not being fed. On switch on after a standing fro about a month machine ran on with toner light on..no paper moving. Changed toner..toner light off ...
Question about Xerox Office Equipment & Supplies
...all details of firmware and finally shows > Set ok. We try to feed a paper but it cannot be fed and the whole thing stops their. What can we do,since we don`t have diagnostic tools installed ...
1,373 questions posted
Usually answered in minutes!
1,012 Questions
743 Questions
623 Questions
406 Questions
381 Questions