Brother MFC 420CN All-In-One InkJet Printer "fax machine getting busy signals" Questions

Fax Machine will not send faxes it has a busy signal always and a busy signal when someone tries to fax me. Hi, You need to reset the memory, since previously you have dialed some number, which is not

...fax machine. There are 4 options on that setting, and the manual explains them in more detail. You can also set the "Ring Delay" for the fax by pressing "Menu/Set, 2, 1, 1." The options shown are "0, ...

...getting Busy or Poor Line Condition. I also have not been able to receive faxes. Faxes being sent from different numbers say they get a busy signal when they are trying to fax to me. HELP HELP Very ...

to fix this problem? I would try to plug a regular phone in the jack to see if you are getting a clear signal/dial tone to the machine, if not, you may need to have the phone company come check it out

...fax machine. Try making the call again. If you now get a busy signal then the modem in your fax machine has gone bad and is holding the line open. Make sure when installing the phone line you are ...

...are "busy" -- receiving many FAXES from multiple customers -- reprogram your FAX machine to "retry" a few times. Or, when a receiving FAX runs out of paper, it sometimes refuses to accept "new"

fax machine error My fax machine gets a busy signal right before it starts dialing. I get a dial tone, then I hear the busy signal even while it is dialing out. The call doesn't get through and I have

...troubleshooting guides reconfigured the fax machine rebooted and everything else, all i get is a busy signal and no response i just wanted to know can you adjust the incoming phone calls to fax ...

...fax to my machine or call the number I get a busy signal. Also, once in awhile I get a message on the display that says "phone off the hook". Well there isn't a phone. I've tried powering off and on, ...

fax machine to the wall jack) and and a telephone (the telephone connects to the fax machine). In order to fax correctly, you must plug the line into the jack with a block (looks like a 'T') marked on