...slide side to side. Do this 10+ times and this should fix your issue. Make sure to put the blue tab back in the original start position which is believe is to the left on that model. Follow the ...
Question about Brother MFC Office Equipment & Supplies
...Slide blue tab..." Keeps reading error, Take Drum out; Slide Blue Tab side to side, I have done this numerous times. We have replaced the drum, I have reset the drum, It still is coming back with ...
...Slide this blue tab back and forth several times. You have just cleaned your corona wire. Make sure you slide the tab all the way back over to the right before putting the cartridge back into the ...
Question about Brother MFC Office Equipment & Supplies
...slide the blue tab on top back and forth. Be sure to return the tab to the home position afterward. There are three main issues that can cause lines vertically on the page: dirty corona wire or ...
a blue tab . You take that tab and slide it back and forth and this will clean the corona wire. Now when your finished make sure the tab is placed back from where you first started. I hope this helps
Question about Brother MFC Office Equipment & Supplies
...slide blue tab from side to side a few time. where is the drum? When you open the door in front pull out the drum/toner assy. You will see a blue piece on top left side. It will slide right and left. ...
...is in home position, it is a blue tab on drum that slides width of drum to clean charge wire, try sliding up and back a couple of times and make sure it sits at home position marked with an
Question about Brother MFC Office Equipment & Supplies
...blue plastic tab, then slide the tab back and forth several times, making sure you return tab to the same side it was originally on. if that doesn't do it, make sure your "****" glass to the left of ...
...blue tab from right to left several times; then, return the blue tab and snap it into the home position (triangle sign). Install toner and drum into your machine and print test. Good luck to you. I ...
...slide the blue clip on the drum back and forth, which we have done x100. We tried to reset the drum but it is still giving us the same message. Help please!!! This seems to happen some of the time. ...
202 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
406 Questions