Brother MFC-7820N Laser Printer "close back cover" Questions

close back cover but back cover is already closed Open the front cover and remove the drum and toner(cartridge) There should be a paperjam in the machine. It reads back cover open because the piece of

...paper jam. Besure to check the back cover, normally all paper jam is from the back. be sure to close the front cover at the last cover to close. open the top cover also and close it then press ...

Close the back cover--but back cover is closed wont print because it insists that the back cover is open. Used to have to squeeze the back cover until you could hear it "catch", now it won't even ...

...Close the back cover. What should I do? There is a black color flap inside the main back cover which came down ( I don't know how) which is probably not closing all the way. How to close that black ...

...close the back cover" where is the back cover? The back cover is located on the back of the printer at the bottom. You can find it by looking for two tabs on the right and left that if pushed will ...

...close the back cover" error message. I've repeatedly opened/closed the back cover, taken out toner cartridge, checked for paper jams or scraps. Can't tell exactly what piece, on the back cover, ...

closed You will probably have a broken hinge at the back left hand side of the Doc. cover. This means that the cover won't close properly at the back corner, and the cover sensing switch won't actuate

my brother mfc 7420 says that the back cover is open When this happens it is just telling you to go through the steps of opening and closing the back cover. The back cover may not be completely closed

...close thre back cover? How do I reset the printer orf find the underlying fault? First be sure you close the back cover and remove all the jammed paper. after that, turn off your printer for 1 min to ...

...Close the Inner Back(Rear) Cover (1) if it is open as shown in the illustration. Close the Outer Back(Rear) Cover. Make sure the cover is closed properly. Pull the paper trays (1) out of the ...