...color wheel i have a similar problem and am looking for the part, the color wheel is a small electric motor that spins at a high speed and it can go bad. which will lead to the horrible ...
Question about Sharp Office Equipment & Supplies
...color wheel area? Sounds like bearing picture looks OK. Moving the projector just a little can cause the winding to come back. The color wheel spins at a high rate of speed like a cooling fan...Since ...
...color wheel, lamp lights then after 10-20seconds all stops no fan or color wheel noise and lamp goes off and all control panel lights continuously flash blue together, no red warning lamps. Cannot ...
Question about InFocus Office Equipment & Supplies
...for a few minutes before the red light comes on and the projector switches off. What is the problem? What is the solution? dear, please check the color wheel inside, maybe it is color wheel ...
Color wheel for a 4805 I need to either repair or replace the color wheel in my projector. Can somebody please tell me how to do so and where I can find the parts? Thank you I've encountered this same
...color wheel(rotating disc that generates the color image). My concern is that the "humming" you hear is actually the color wheel rubbing on something--especially since putting pressure on the unit ...
...Also if the color wheel bearings were so bad that they are "squealing" the color wheel would never be able to spin up to phase lock, which in turn would inhibit the projector's lamp from
...noise coming from a fan that has a slight blockage. Which side does the noise come from. The problem is most likely the color wheel on your DLP projector. It's fairly simple to
Question about InFocus Office Equipment & Supplies
...has about 1500 hours. Picture is just fine. Anyone have any ideas? Sounds like the color wheel This problem occurs when the InFocus projector is turned off inproperly. Not sure how to fix it
Question about Optoma Office Equipment & Supplies
...color wheel. It happened to me. It is easy to change but hard to open the unit up. Just make sure if you change the wheel that you do not screw it in too tight. I did so, closed it up and the wheel ...
12 questions posted
Usually answered in minutes!
400 Questions
218 Questions
72 Questions
80 Questions
76 Questions