...stays on bpr40 If this is after programming your radio needs repaired. We see this when some BPR40s are reprogrammed. Take the radio to your local service center or send to a qualified repair
Question about Motorola Quickstick Radio Communications
...service center said was unrepairable so what the heck ? Thank You ! You can use two small screw drivers, one on each side of the bottom of radio. Insert and lift up. Knobs have to be removed. They ...
Question about Motorola Radio Communications
...service center Motorola near here manila? two way radio Motorola g2000 Get Support / Contact Motorola Solutions Communication networks services powerful devices... Rinocervo Visit Get Support ...
kenwood service repair center Need on off switch, the center brass part broke off. left hand side. thank you Try here: http://www.pacparts.com/ Consumer Electronic Parts and Accessories at PacParts ...
not transmitting Contact ICOM service at www.icom.com, or take it to a marine radio service center.
icom ic-m35, no transmitting Contact the Icom service center. Their main web-page is www.icom.com. From there you can select your geographic area and service (commercial, marine, amateur, etc).
...on this radio? Modifications to this type of radio are only authorized by an Authorized Motorola Service Facility. Check your local phone book for Authorized Service
...have then the radio will have either a cold solder joint on the main board or a transister has gone bad. The unit will require service at a local radio shop or send to Uniden Service center. Pat ...
...service center, or send the radio to Motorola Repair Depot. The password can only be removed by a qualified service tech. It generally means clearing the entire memory of the radio. This will erase ...
72 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: