Motorola Mag One BPR40 Two Way Radio "scan" Questions

Ad

my bpr 40 all time have a green light on in a scan mode how i can block the scan mode In order for your radio to scan, it would need one of the side buttons programmed to scan. Usually the top side ...

Ad

Question about Motorola Quickstick Radio Communications

1 Answer

...to short press Monitor, long press Sticky Monitor. The bottom button comes from the factory on scan/nuisance channel delete. The buttons can be custom programmed when the dealer is programming ...

Ad

Question about Motorola Quickstick Radio Communications

1 Answer

buttons are likely top button = monitor/sticky monitor and the bottom button could be hi/low power, scan or one of several other features. Each button has a short and a long press option. Best regards

Question about Radio Communications

1 Answer

How do I reset my kenwood TK-3212L ADD TO SCAN/ DELETE FROM SCAN Press the key programmed as Scan Delete/Add to add or remove each channel to or from the scan sequence. • The channel add indicator ( )

...It is a 16 channel radio I am unable to find the proper precedure to select the channels I want to scan when the radio is in the scan mode. I believe that I can select the channels using the buttons ...

Question about Motorola Radio Communications

1 Answer

CP 200 LED shows it is in scan mode, but does not ... Cp 200 led shows it is in scan mode but does not pick up traffic on other channels. How can I get both channels to scan On the CP200 radio the ...

Question about Motorola Radio Communications

1 Answer

HT 1000 Set Scan mode I have a HT 1000 with no info on use. Need to set scan mode. First, your radio must have one of the side buttons programmed to be scan on/off. You will need to experiment while ...

Question about Uniden Radio Communications

1 Answer

scan chennels can i add extra scan channels to a uniden UH0 88 UHF if i have the frequencies. Go to Page 10 of your owners manual the section marked "open scan mode allows you to set which channels ...

Question about Kenwood Radio Communications

1 Answer

TK 760 scanning delay I have a mobile TK760HG and it takes forever before it stops scanning and lands on an active transmission. Most transmissions are done before the radio goes to that channel Hi ...

Question about Radio Communications

1 Answer

Trying to get an MTS 2000 FLASHPORT to ride a primary channel and scan another channel Program the scan list in the codeplug. This is a feature that must be programmed into the radio via the dealer ...

Not finding what you are looking for?
Motorola Mag One BPR40 Two Way Radio Logo

72 questions posted

Ask a Question

Usually answered in minutes!

Top Motorola Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1664 Answers

Jane

Level 1 Expert

31 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a Motorola Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...