Motorola Mag One BPR40 Two Way Radio "receiving" Questions

the green light that indicates that some one it talking and goes red when you key always slays on This is an indication of a receiver problem. Two things cause this. The receiver needs to be realigned

My magone BPR40 radio isn't sending when PTT is pushed. It is receiving fine. Any suggestions? A couple of thoughts: 1) Check the mic hole and see if it is covered or clogged with debris. 2) Does ...

...all transmissions. The constant green light generally means the radio is in receive mode, or is receiving a transmission. You might check your antenna to be certain it is properly attached, is ...

My BPR40 transmits to one radio but can't respond ? I have three radios. One recieves from the other two, but cannot send to the other two. The other two cannot receive. Any suggestions. I am ...

will not transmit or receive Contact Motorola Solutions. Get Support . Mark Motorola Mobility Support

my mag one bpr40 will not transmit. the green light is on all the time. it will receive. how do i fix this problem Green light coming on and staying on... Sadly nothing the end-user can do to ...

We purchasedn 3 bpr 40 and we justed ordered another, when we turn the bpr on to the channel of the 3 others that are in use, we just get a low continual tone, i tried a radio check on channel 1 with ...

re: MagOne by Motorola, BPR40 -- What button should I push and how many times to make a radio stop beeping repeatedly before I can communicate? Thanks! None of the buttons will solve this issue. A ...

What would cause my Yaesu 857d to transmit ok on 2 meter band, yet not receive all the time on the same? My Yaesu Ft-857 transmits ok on 2 meter. But the receive only work sometime? As I was stating. ...

Kenwood TS-820 Receive Help The s meter is at +25 db like the RF gain is turned down . . . But it isn't. When i turn it down, the s-meter goes full scale and when I turn it back for full receive, ...