Zenith E44W46LCD 44" Rear Projection HDTV-Ready Television "turn video input without remote" Questions

...input. It'd be greatly appreciated. Thanks Sure. I'm not sure if you can do it without the original remote, though. On my remote, you need to have the tv turned on, then press the sleep timer, then ...

turn it on and use the remote but we only get "input1" on the upper left corner. The menu shows also, but that's it. We don't get a signal. Is there something we should do first? Do we need a specific

...input stream without any indication to the user. 4) The dialogue over the HDMI tells the set that there is no video being sent/ The best thing to do here is to look for a pattern of when this occurs. ...

...turn on,what can I do? I bought an open box unit at Best Buy, it had no remote or manual. Go to http://www.zenithservice.com/, click on owner's manuals, answer the 4 questions using drop down menus ...

...input selected for the video source. If you need further assistance let me know. Please take a moment to accept and rate my solution accordingly. Thanks, Lee Hi, Press TV/Video button repeatedly on ...

...VIDEO 1 or whatever input number you use.If you see blue and or trace lines at a curved angle the blue tube is your issue--there is a way to turn that down but it is inside the set--can tell you how ...

...video inputs and the picture and sound for channels 3, 4 will be blocked out. When FRONT PANEL LOCK is turned on, all buttons on the Front Panel will be deactivated, except the Power button. When TV ...

...turn the set off and try this stuff immediately), press and hold both the "VOLUME Down" button on the TV itself and the TV/VIDEO key on the remote control simultaneously for about 7 seconds (they say ...

...turn off the tv from within the menu and unplug for 30 seconds, according to a few forums I've read). However, I don't know how to get into this service menu. Thats not what I was told by JVC, but if ...

...turn the TV on, and the HDMI port is reenabled. Here?s how to get to Service Menu: Before entering the SERVICE MENU, confirm that the setting of TV/CATV SW of the REMOTE CONTROL UNIT is at the "TV" ...