Zenith IQB50M90W 50" Rear Projection Television "preset" Questions

...be three or more reasons for this: 1) The sleep timer may be on causing the TV to turn off after a preset time. 2) If sleep timer is on and no signal from the remote is received for a preset time ...

...Volume up 177 Channel up 185 Channel up 204 9 205 1 207 Volume down 209 Channel down 210 Factory preset 236 Factory preset 237 6 238 Menu (ch up/dn)/right 240 Menu (arrow keys only) 241 Sleep

Pincusion/Convergence Problem I just replaced the HV Splitter and it sovled my arcing problem. The TV comes on fine, but I have a severe convergence problem and the screen seems to be pincusioning at ...

hitachi 53sbx10b align bulbs. have a blue shadow After warming up, try Magic Focus Convergence IC defective = replace both.......Do not "align bulbs"....that is factory preset.......T.

...a NEC TV Model #4856 using the NEC remote control # RD111OE... Can anyone help! Hold down both the PRESET-HOLD buttons at the same time Press again until AUTO is displayed. Press ^Vloume to start ...

...your coaxial cable antenna , try verify it using a standard tv if tv can get channel after you preset or auto tune meaning your ant. works. if not repair the ant.

Need to get back to channel 73 for cable readiness. Currently not exceeding past channel 69. Any input? check the channel no 73 maybe it was skip. go to menu then preset channel unskip no 73.

WENT TO THE MENU AND CLICKED ON DIGITAL SETUP ON ACCIDENT AND NOW ITS SAY NO PROGRAM HOW DO I GET MY TV BACK find it there is a default setting where it changes back to factory presets.

Picture is horizontal, stretching fully across screen, but only about 6" tall vertically. check the horizontal preset, and surrounding componunts, like capercetor, resistor, diode . or change IC.

...THE POWER(ELECTRIC) ON THE STANDBY MODE-LITTLE FLAS (RED COLOR)SHINE-THE ON/ECO BUTTON.THEN I PRESS PRESET(DOWN)BUTTON AND CLOCK START TO FLASHING ABOUT 3,4,5 SECONDS.IT SHOW :06 AND MOVE 3-4 TIMES ...