Zenith D52WLCD 52" Rear Projection HDTV-Ready Television "tuner section" Questions

...section of the tuner needs a repair. I have repaired many tuners for sound. Some technicians never repair a tuner hence it would need a replacement if it can be physically removed. If a tuner is ...

...tuner section problem. When you are playing a DVD. You are only using the audio video circuit of the TV. Something like a monitor. But when you go back to TV mode... You are now in the tv tuner ...

...tuner section. This sounds like the low voltage powers supply is going bad or that the tuner section might be going bad. Does the picture fade to snow? Also I would suggest that you let a TV ...

...tuner section of this TV depends heavily on ground points through the tuner shield, over time metal fatigue causes the ground pads to separate from the board, these points need to be re-soldered if ...

tuner. If neither work, then the video processing section is defective and will need further troubleshooting. Thanks, Dan Decoder is a issue then the decoder is part of the tuner that went out at this

...tuner section (internal to the TV) or your cable TV/aerial or your cable box/decoder. If the humming sound and no color is present in either TV tuner/channel and with an external video source such as ...

section of tuner circuit PLL, etc This definitely sounds like bad solder joints in the tuner or in the tuner connector. If you know what a tuner pack looks like you might be able to find it inside (no

...tuner section of the TV has some issues. To determine whether cable or tuner, pls try installing a known operational VCR and play a good tape. Connect the RF OUT of the VCR to the CABLE/ANT IN of the ...

...tuner (or you can just use one of your other video inputs) If the problem is in the video section (which includes the microprocessor) we are going to have to troubleshoot the video section which will ...

...tuner section will resolve the problem. Keep us posted. You either have a bad coable connection or a bad tuner. The snow is because no signal is being detected. This can be a bad tuner or a bad power ...