InFocus LP640 Multimedia Projector "remove broken screw" Questions

screw has broken off, and the screw has been completely removed. Is it possible to get a replacement leveler and repair it myself? part # 410497 is the elevator feet kit (all 3 feet). each foot is not

...remove the broken foot, place a tight fitting rawl plug in the hole left and screw a screw into the hole slowly until it fits to the size you want.I know this is a very DIY solution but it's what ...

...moving, faulty, broken, than the problem occur. Experience: many times a broken piece of plastic or self removed screw to stop the fan moving or jam to dust. Solution: service your projector and ...

...Remove the screws and check out the fan's working state. EP759 have one big 92mm fan for the lamp, and three small, near 40mm, fan's for the optics. Power of the bulb is very high, so just 1 broken ...

...remove the bulb cover. Lift up the top cover carefully starting from the front then all together. The cooling fan is mounted very near the bulb assembly. Carefully check the fan blades for any ...

...broken" one, same symptoms as yours, for $20 and pulled it apart to see if I could fix it. I just had to replace the fuse and it works great. You'll need a 2.5A 250V time delay (i.e. slow-blow) fuse. ...

...broken color wheel. How to pray open my Infocus LP130 to reach to the color wheel an maybe fix it or replace it. It's been awhile since I worked on one of these, but I believe there are 2 screws on ...

broken and a third by tightening the colour wheel screw too tight. This will work for awhile but the colour wheel does need replaceing one day. If anyone can tell me how you can get Optoma to sell you

...remove the mother board. When I got the fan out and cleared it there was a CHIP OF THE PREVIOUS BROKEN BULB THAT LODGED THE FAN BLADE. To disassemble the projector is not extremely hard for a novice ...

...broken, I ordered a replacement and finally got it. Now, however, the problem is that I can't get the darn thing open to replace the color wheel. I unscrewed the bottom 6 screws but it still won't ...