InFocus ScreenPlay 4805 Multimedia Projector "breathed" Questions

Question about Office Equipment & Supplies

How do i fix my projector that will not turn on? it automatically turns off after around 30 secs of starting

How do i fix my projector that will not turn on? it automatically turns off after around 30 secs of starting This could be caused by dirt blocking the internal air flow. It is important for the ...

Question about Office Equipment & Supplies

1 Answer

In3126 blinking blue light no image what's wrong

In3126 blinking blue light no image what's wrong Could be many things. Typically the units get clogged with dust and need a cleaning out so they can breathe. That would be the first thing to ...

Question about LG Office Equipment & Supplies

1 Answer

SNOW LIKE PROJECTION WHITE DOTS

SNOW LIKE PROJECTION WHITE DOTS IMAGE APPEARS WITH WHITE DOTS IF it happens right away, it could be serious. If it happens when it is on for a while, you might need to clean out the dust buildup so ...

Question about NEC Office Equipment & Supplies

1 Answer

Np50 I replaced the bulb but still no light and red light blinks 8 times. Suggest needs cooling pump. Where can ibuy pump

Np50 I replaced the bulb but still no light and red light blinks 8 times. Suggest needs cooling pump. Where can ibuy pump Just clean the unit first. It might be clogged and not able to breathe. The ...

Question about Sharp Office Equipment & Supplies

1 Answer

I thought I needed a new bulb and put a new one in. It came on but a lamp message came on the screen with the picture and then went blank. What could be the problem?

I thought I needed a new bulb and put a new one in. It came on but a lamp message came on the screen with the picture and then went blank. What could be the problem? Many times these unit s are ...

Question about InFocus Office Equipment & Supplies

1 Answer

Infocus X3 light tunnel

Infocus X3 light tunnel how do I replace the light tunnel on Infocus X3 Are you speaking of the small prism shaped tunnel or the lamp itself? The prism or light tunnel may be accessed underneath the ...

Question about Sony Office Equipment & Supplies

1 Answer

Hello.. My projector came on minutes ago now the light is just blinking. Can you please help? I have a Sony vpl-es7

Hello.. My projector came on minutes ago now the light is just blinking. Can you please help? I have a Sony vpl-es7 You might check the following: * signal is going to the input. If not, does the menu

Question about Office Equipment & Supplies

1 Answer

How can I fix a dynamic contrast error

How can I fix a dynamic contrast error Projector has started getting a red 9 blink status light. Book says it is a dynamic contrast error see you dealer. Are there any quick fixes that can be tried to

Question about BenQ Office Equipment & Supplies

1 Answer

BENG MX501 projector after 2 minutes will go fully power off. Will on when unplug and keep after 5minutes will on

BENG MX501 projector after 2 minutes will go fully power off. Will on when unplug and keep after 5minutes will on Sounds like it might be overheating. Clean out all dust and make sure the lamp can ...

Question about Toshiba Office Equipment & Supplies

1 Answer

Gets hot shuts down its toshiba TDP-SP1

gets hot shuts down its toshiba TDP-SP1 how can i resolve it?? do i need to change cooler? Make sure filters are cleaned. Use a vacuum so you don't spread dust around inside your projector. Make sure ...