Zenith ZN110 Remote Control "vcr turn power button" Questions

...turn ON your device (TV, VCR, Cable Box) Press and "HOLD" CODE SEARCH Press and release the device button you want to set up (TV, VCR, Cable Box) However, if you are using AUX for a device, press and ...

...the POWER button until your device turns off. You may have to go through up to 200 different codes until it turns off. Once the device does turn off, press the VCR button again to store the

...VCR to turn it on. 2. Press and hold the "PRG" button in the upper left corner of the remote. Release when the indicator light, located in the top center of the remote control, comes on. 3. Push the ...

...turn on the VCR/DVD/Cable set top box. 2. Press the VCR/DVD/Cable set top box button on the remote control. 3. Press and hold the SETUP button until the LED LIGHT flashes twice. 4. Enter the codes ...

...POWER key and the DEVICE(TV,VCR,CABLE,etc.) button until your device turns off.(On VCR,LD,and CD players use PLAY instead of POWER) Make sure that the remote is pointed at your device during the ...

...VCR MODE button, then red TV button on the remote to turn on the sound bar. Press VOLUME on the remote to confirm the remote controls the sound bar. If this does not work, return to Step 1. Remember ...

...light then press vcr button make sure vcr is turned on. After pressing vcr button press power button on remote repeatedly until power on vcr turns off then press enter on remote should be set for ...

...power off button didn't do anything either. The VCR came on, but nothing else did. I manually turned off the VCR, but now I can't use the remote at all. Have you tried the "help" button? That usually ...

...turn on the device (TV, VCR, DVD, etc.) you wish to program. 2. Press and hold the CODE SEARCH/SETUP button on the remote until the INDICATOR LIGHT lights, then release. 3. Press and release the ...

...VCR should turn on. If not, try another code until you find the right one. To setup your URC-3021 for a VCR, these are the steps: 1. Turn on your VCR. 2. On the remote control, press VCR once. 3. ...