Question about Sony Audio Players & Recorders
...passive type sw? connected sub to low-level (rca) sub-out on my sony str-de935 - sounded great for a few minutes, then popped & started making buzzing/rattle sound with each note. (mono input on sub, ...
Question about Kenwood Audio Players & Recorders
...passive then you need 2 connect sub 2 ur tape loop with rca connections,usually you use the send signal from ur reciever which would norm connect to ur tape input , if the sub is passive then u ...
...RCA's and put them through the pre-outs. thanks in advance, Audioclot To connect the passive sub you have to connect the provided wires to the receiver then to the sub's inputs and from the sub's ...
...10" and self powerd. subwoofer fuse is good, speaker powers up and is not blown. Im using an RCA cable from the low level input in the sub to the sub pre-out on the reciever. I've
Question about Audio Players & Recorders
RCA phono plug connector that sends low level signals to a powered subwoofer. To connect a passive subwoofer, one without a built-in amp, the main speaker outputs connect to the subwoofer and are then
Question about Infinity Audio Players & Recorders
passive (unpowered) sub if your HTS says it pushes only 25 watts. Without frequency bandwidth and distortion noted the spec is virtually useless as a comparison. The BU-1 is a powered sub that accepts
20 questions posted
Usually answered in minutes!
681 Questions
296 Questions
322 Questions
225 Questions
200 Questions
