Question about IBM Office Equipment & Supplies
IBM Wheelwriter 6 - Ribbon doesn't lift high enough for the key that's pressed to print on paper. Ribbon advances OK. IBM Wheelwriter 6 - Ribbon doesn't lift high enough for the key ...
Question about IBM Office Equipment & Supplies
IBM Wheelwriter 2, the bottom half of the letters are not printing. It is not the ribbon because I have changed it out. Two things come to mind for this problem. First try pushing down firmly on both ...
Question about IBM Office Equipment & Supplies
...ribbon cartridge in ibm wheelwriter 3 not printing now just changed the ribbon & correction cartridge, but now it won't print help! If the ribbon is lifting up you probably have a cracked print ...
Question about IBM Office Equipment & Supplies
...IBM Wheelwriter 1500 that stopped printing. When I lift up the cover and tap on the cartridge, it's almost immovable. Normally, it moves easily up and down, almost bounces when I tap it, but not now. ...
...lift off tape cartridge Remove the ribbon by pushing the blue lever to the right and front of the ribbon. The correction tape cartridge is attached to the bottom of the Printing ribbon. Depress the ...
Question about IBM Office Equipment & Supplies
...IBM Wheelwriter 6. I think the ribbon is sitting too low. Whenever I type, the letters hit the paper above the ribbon, thus making no markings on the page. I do have the correction tape installed ...
Question about IBM Office Equipment & Supplies
IBM Wheelwriter correction tape will not lift off print. New correction tape installed. You may have a very old L/O or ribbon. The ribbon may be a non correctable the knob must be orange, yellow or ...
Question about IBM Office Equipment & Supplies
...IBM Wheelwriter 5) has a new ribbon in it and advances perfectly - but I can't get it to print out the letters or numbers on paper - I changed print wheels and did everything I know how to do - it's ...
Question about Lexmark Office Equipment & Supplies
...IBM typewriter technician for 15 years in the field. Currently I support Servers for a major bank data center. Concerning the lift off I think the print heads correct with a negative and prints ...
Question about IBM Office Equipment & Supplies
...print the ribbon is probably not lifting, wiggle the big black gear on the right side of the printer. If it doden't print the print solenoid cap is probably broken. We sell the cap with instructions ...
146 questions posted
Usually answered in minutes!
1,487 Questions
1,353 Questions
1,277 Questions
961 Questions
741 Questions