Symphonic SC3919 Combo "aux tv" Questions

...AUX to regular TV There probably is a TV/Video button on the bottom of your TV. Push the button until the screen changes to a regular screen. The TV/Video button is also on the remote most likely. ...

...AUX button to turn the TV on and off. Once the TV is on the volume control on the remote operates the TV volume normally. I still need to toggle between CABLE and AUX depending on which device I'm ...

...aux. Also its a good thing to note that we have had the tv unplugged for quite some time. Unplugged should not have been an issue.Try this to get to AUX Down Channel select passed 2 shoud be your aux ...

...AUX Ok, so I got this TV used however the first time I used it everything was fine, and then I decided to move it a few feet and now it keeps flickering from channel 3 to AUX and back to Channel 3. ...

...TV Press AUX and the SETUP until AUX flashes twice Enter code 991 (AUX flashes twice again) Slowly alternate pressing AUX and POWER (not All On) NOTE: it took me about 35 times to get to one that ...

TV, VCR, DVD, etc.). For AUX, press AUX then the device button you are assigning to AUX. The INDICATOR LIGHT will blink then remain lit. 4. Enter the three or four digit code for your device using the

. it is likely you have the hdmi cable going to your cable box and the dvd is cabled to aux or tv input . so that would be correct. you can connect the dvd to the cable box aux and then just switch it

...TV type for TV, and then set the STB button to control STB, TV and AUX and you should be set. I have the panasonic pv-df2035, and I just got 3197 to work with my Verizon remote. hope that ...

how to turn input without remote On the TV set, channel buttons. Turn channel down below ch 1. You should see Line 1 Line 2 etc before hitting the highest channel# Yours may say Aux 1 (or Aux 2)

...TV or AUX Press and hold "Setup" until TV/AUX blinks twice Enter 9911 and press "Power" using the Comcast remote Press "Channel Up" until device powers off Press "Setup" to lock in that code Please ...