Microsoft Xbox 360 Console "plug round controller" Questions

round button located at the top of the controller next to the cord's slot in the middle, push this as well. Both the Xbox and controller should start flashing in a circle then they will start blinking

...round Connect button. On the controller, press and release the Connect button. The Connect button is the small button on the front edge of the controller, between the left bumper button and the ...

...plug it in. if not, look at the top of the controller near the battery pack. there should be a small white button right by the left bumper. press and hold that until the ring of light starts ...

...round and then press the controller connection , once i hit the button they both flash all four lights at me then xbox stops flashing and controller continues to flash, please help lol Thanks Al The ...

...round connect button marked '>>',( to the right of the memory port 2) press and release this and there is a little pairing connect button on the controller at the front press this, then the lights ...

...round a friends for a few days and it worked fine. Once i brought it home and hooked it up with my HDMI cable again it wont even show a thing on the screen. It powers up and the green light in the ...

round the back, then using a vacuum to clear all the dust out of all the crevices, be careful not to open the case unless you dont mind voiding the warranty or you have the skils/tools/expertise to do

...to the game system? align the end of the controller plug to the slot in the console and put it in. make sure the flat part and the round part of the controller plug and the console slot are

...round plug to a usb so it will work with xbox. how and where can i get another one? I would try contacting the maker of your controller and asking them if they could send you a replacement if that ...

...round and no error readings. -try keeping the controller connected to the playstation with the wire when you try to turn it on -while playing games hold the PS button and make sure the controller is ...