Question about KLH Audio Players & Recorders
jack input, however the subwoofer does not have a corresponding input. Do I need to connect my speakers directly to the subwoofer and then route those connections to the speaker connections on the amp
...Jack on the rear that has LFE input the input for the 2 10" subs or is the terminal post that has bass input ? If you still have these speakers and want to sell, I'm looking for a pair. ...
...high level or just keep it a low level??? On the subwoofer's L&R input, you'll see a tiny "mono" next to the Left input. Hook up your receiver's single sub output to this jack and you're all
...jack sets on the speakers is for "bi-wiring" or "bi-amping", not necessary for basic stereo reproduction. So - CD red/white RCA out -> preamp/receiver red/white CD/AUX input. Amp speaker output ...
...jack patch cables for "playback and record" on the EQ and amp while keeping the 'tape' button on the amp engaged at all times. You should be able to manipulate all of your input 'devices' (CD player, ...
Question about Bose Audio Players & Recorders
...input on the accoustimass subwoofer then connected (via output from subwoofer) to the speaker jacks on the receiver. Why not bypass the subwoofer and connect the 5 surround speakers directly to the ...
input is a 1/4" jack, it is likely thae contacts are bent out, away from the connector. Bend them back to center slightly, and clean them with alcohol or "deoxit". "Half" the sound from the horn seems
...input and another finger on the heatsink..(black metal plate at the back) then the hum goes away. I did notice that Cerwin V maunfactured this older LW12 unit with a 2 prong cord. I personally own a ...
Question about Bose Audio Players & Recorders
...bass boost being applied in recording AND playback through the 901's. If the recording volume doesn't vary with speaker volume and the playback sounds as flat as the recording you're good to go. If ...
...jack. i tried all the usual "check connnections' stuff. nothing. ant ideas? We're talking Sony SA-WM200 Sub, right? OK, now we go through the usual drill. Does it work during speaker setup? Yes? Not ...
97 questions posted
Usually answered in minutes!
97 Questions
43 Questions
38 Questions
24 Questions
19 Questions