2010 Hyundai Accent "ignition coil located" Questions

location of camshaft sensor The camshaft position sensor is located on top of the engine near the ignition coils.

...rear of the cylinderhead, next to ignition coil, heres a picture of the camshaft sensor. It's on the side of the cylinder head, at the end, close to where the camshaft is at, held on with 1 10mm

how do I change spark plugs on a 2010 hyundai accent location of spark plugs you need to remove the ignition coils and you goin to see the spark plugs

...ignition coil resistance with in specification replaced condenser no effect. here winning sound for about 15 seconds after turning off ignition. Another person had a similar issue with their 2003 ...

...Ignition Coil 3.It can happen due to faulty spark Plug where it time to need to change those faulty Spark Plug while Changing those spark plug do go for spark plug such a NGK or Denso this both ...

...( ignition module, coil, etc.) is heating up causing it to fail intermitently, look on ebay for ignition module it is located under the distributor cap. had a similar problem it was wam start ...

...coil packs and crankshaft sensor, then work back to the ignition module. Check Battery is in good condition or else u want change the battery. beforethe ignition module check this Check all of the ...

...ignition coil,but more likely fuel pump.Check 1 or 2 plugs to see if you have spark since that's easy enough to at least verify.Pull the plug,plug the wire back on to the spark plug,hold the little ...

Ignition CoilPart Number: E563C Manufacturer: ACDELCO PROFESSIONAL Grand Blanc, MI 800-223-3526  This is the coil pack and the plug wires go from it to the spark plugs.  These don't fail