SkyScan 86709 Atomic Wall Clock "battery remote" Questions

Can reset everything on my SkyScan Atomic Clock except for the outside temp. Have new batteries in both units. Main clock and outside remote thermostate..Any suggestions?? I expect that since the unit

battery then do the following: 1. Make sure you have good batteries installed in the remote transmitter 2. Remove the batteries from the main clock and keep them out until the clock display disappers.

...battery compartment). Little red light on the remote unit started flashing and remote temp showed on the main display. Then you have to wait for atomic time to reset itself or set the time and other ...

my skyscan model 87800 will not show outside temp. i have changed batteries but still get nothing on outside temp Look in the manual, There should be a section on remote sensors, they usualy have a ...

battery then do the following: 1. Make sure you have good batteries installed in the remote transmitter 2. Remove the batteries from the main clock and keep them out until the clock display disappers.

remote that gives outside temp does not work put in new batteries, still does not work! Pull the batteries out of the clock, wait a minute, and then put them back in. That will reset the link between ...

battery then do the following: 1. Make sure you have good batteries installed in the remote transmitter 2. Remove the batteries from the main clock and keep them out until the clock display disappers.

...battery door of the indoor clock. Replace the batteries in the remote temperature sensor first. Remove/replace the batteries in the internal display unit. Reception for the atomic signal will require ...

How are the batteries replaced, in the transmitter first, then the clock? Hi, The transmitter for your radio controlled clock is the atomic clock in your region, I wouldn't advise trying to replace ...

can not get my outside temp to work... can you help me? Move the REMOTE unit closer and make sure the batteries are good (in the remote unit), It takes some time to send the signal to the clock.