Konica Minolta magicolor 2300DL Laser Printer "toner leaking" Questions

Toner Leaking I refilled my toner cartridges several months ago and started experiencing leaking toner. After some cleaning and troubleshooting, I decided to replace the two toner cartridges that were

...toner is leaking or something and **if** it prints at all it has blue toner all over it. Finally, I just noticed that the black seems to be chipping off. My guess is it needs a trip to the doctor, ...

...LEAKING ALL OVER THE INSIDE OF THE PRINTER, WHAT WOULD CAUSE THIS? Most likely reason is the printer is either a display model, or previously been sold and returned. The toner cartridges are usually ...

it has always been like this. Please advise Check the paper path to ensure that there is no spilled toner anywhere. Take a look at the toner drum and make sure it is clean and there is no toner leaks.

wont recognise that toners are installed What I tend to do is remove all the toners.. this can be done easily by pressing a pen into the hole on the right at the top of the printer then the drum will ...

...firmware. Have replaced the drum at one point. I refill my own cartridges. i had that happen when toner leaked out and got all over the place...try cleaning up any stray toner [even in the places ...

leaking and the fuser is not heating up enough to blend it in a fuse with other colors. I think I just need to clean it with compressed air, but don't know how to remove the cartridges if they are not

...toner that may be leaking on your pages. So I understand correctly, you were seeing different color toner on the cyan and yellow rollers?. If so gently clean that side of the roller off. Rotate the ...

...toner is leaking or something. I don't know how to fix this issue. I've cleaned the inside of the printer several times and it seems to get worse or stay the same. The toner is leaking. The ...

...leaking toner on pages I am printing. Using Lexmark branded recycled by Lexmark toer cartridges and about 2/3 are having this leaking problem. It is getting expensive. Is this a well know issue with ...