Konica Minolta magicolor 2300DL Laser Printer "fuser" Questions

get message of fuser low therm 1F get message of fuser low therm 1F One of the two small thermostats, that are called "snap-action disc thermostats" and control the electricity flow to the fuser lamps

FUSER (?) FUSER What the reason and how to sold this problem ? If you have a fuser error it's probably a burned out lamp or temperature sensor. In rare cases the power supply for the fuser goes out ...

need to reset the fuser counter need to reset the fuser since I replaced the fuser, but printer still thinks the fuser needs replacing - cannot find where the fuser gets reset this is a Konica Minolta

I have a Konica Magicoloe 2430 dl printer. Is it hard to replace the fuser unit? If your not mechanically incline don't bother to replace. To replace the fuser unit remove transfer belt,back ...

Magicolor 2200 error Service Call 1f fuser low therm What does this mean? We just replaced the transfer belt (cost $365), and then got this additional error message. Thanks in advance for any help you

Konica 2300w jams paper on the fuser unit. The coming paper sticks to the fuser more than it should and gets torn while coming out. Could that be caused by a wrong toner type fill? As far as I know, ...

In Konica Minolta 2430dk, I had a media jam in the fuser. I cleared the visible paper, but there is still some stuck inside the fuser that is impossible to clear (I can't get my fingers to it), so ...

...the 2430. It was reporting media jams. We determined after removal and careful inspection that the fuser roller and fuser pressure roller had been damaged by what looked like someone attempting to ...

Fragments of paper inthe fuser I also have fragments of paper in the fuser. Any ideas? The only way I was able to clear fragments of paper from the fuser was to remove the fuser it was then easy to ...

...the lapse of a given period of time after the cycle has been started. -- Relevant electrical parts Fuser unit Printer control board (PRCB) DC power supply (DCPU) -- Solutions: 1 Check the fuser unit ...