Question about Konica Minolta Magicolor Office Equipment & Supplies
but the printer still says "toner life end change K toner" Anyone can help, please? I thank you in advance Hello, it's probably fault in K toner chip. Try with new toner. Hope that helps
Question about Kyocera Office Equipment & Supplies
...fault Error Code C2861 that looks like a knoica minolta code not a kyocera. Worn "Y" developer- is the developer at or near end of life? Worn "Y" developer unit- is the developing unit over ...
...life if it says 80-100% change it! E020 There is a fault associated with the drum/developer. For the first 2 digits of detail code xx12 through xxD0, xx=01: Y xx=02: M xx=03: C xx=04: Bk xxBO: The ...
Question about Xerox Office Equipment & Supplies
...life. In the same area under the machine status , there is also a section there for active messages and fault codes. Make sure you look there. If you have additional questions please ask. If there is ...
Question about Ricoh Office Equipment & Supplies
Ricoh 1200s printer showing error Drum life end I have reset drum so many times but fault is same pls. Help to fix this error Reset yes, did you actually replace the drum? -Carl
Question about Office Equipment & Supplies
...fault if all the lights are flashing? Do you mean pulsating? Poor ground somewhere in the electrical system. Schematic needed to trace where grounds are located. OR battery is near the end of life, ...
fault is due to the waste ink pads being full, The machine will stop working until the machine has been servcied and cleared. Normally it is the end of life once the ink pads are full. By time you get
Question about Konica Minolta Magicolor Office Equipment & Supplies
...life. Contact a dealer. I read on a web page that the ink pads needed changing. Is this worth doing it yourself? Where do I get them? Also, LCD screen went out, pretty difficult to use w/o it. Repair ...
Question about Xerox Office Equipment & Supplies
fault has occurred and only allows me to access the Scan,menu but the photocopy is deactivated Have you checked the machine status, then checked the supplies? One of your drums may just need replaced.
290 questions posted
Usually answered in minutes!
321 Questions
244 Questions
182 Questions
115 Questions
97 Questions