Question about Konica Minolta Magicolor Office Equipment & Supplies
...end of the paper to provide the initial push through the paper path/rollers. If the unit has been in use for some time, it may be then wear & tear, the rubber has considerably worn out that it no ...
Question about Konica Minolta Magicolor Office Equipment & Supplies
...amp;%t. Just take the cartridge out. Go somewhere that you can dispose of the toner (make sure it's not windy !) then turn it to the 'locked' position. This opens the port, then just shake the thing ...
Question about Konica Minolta Magicolor Office Equipment & Supplies
...seemed to do the trick for me. I did the "reset" thing, it didn't work by itself but I did remove & clean the big grey roller (I used an eyeglasses/lens wipe) and now it works. Thanks for the ...
Question about Konica Minolta Magicolor Office Equipment & Supplies
...2300DL, i have found a simple FIX: Unscrew the BACK of the printer and find the Main Engine & the white Rolling Bearings. Just Spray generously some lubricant or grease on it. Put back the ...
Question about Office Equipment & Supplies
...end chips what that colour and намудрили, turned out to be that some other colour ended but device does not ...
end" I changed the drum & the toner & it still won't clear or run??? yes there is a reset. open the front cover and press "clear/back" or "option" then press "start * 0 0" and close the cover.
...end windows comes up and says to insert cd and click on... You can download the Dell printer driver from their WEB site. Please click on this link and select your model printer :- ...
Question about Konica Minolta Magicolor Office Equipment & Supplies
...amp; the printer is under warranty.... Kindly look the matter at your end asap. For further details call@ 09907138916 or mail @ [email protected] hello problem is your scanner unit contact ...
Question about Sharp Office Equipment & Supplies
...amp;#1077; 0 Stepping motor 10 Mirror motor 40 Dark box switch 8 Mirror motor C1 Charge corona C2 Transfer corona C3 Discharge corona CH Interlock or thermal fuse CH possible DV unit not installed ...
...amp; computer) Wait for at least 1min. Plug the power cable back in to the printer make sure that the other end of the power cable is connected directly to the wall outlet. Turn on the printer. Check ...
290 questions posted
Usually answered in minutes!
321 Questions
244 Questions
182 Questions
115 Questions
97 Questions