OKI MICROLINE 521 Matrix Printer "close cover" Questions

oki 520/521 alarm light flashing,utility and prop light on Cover on these are often broken causing the two little switch's to not close on left and right of lid

sure to remove any loose particles of paper. 5. Reinstall the pull-up roller assembly. 6. Close the access cover. Never use solvents or strong detergents on the cabinet ? they could damage the housing

...Cover 32T-26.eps 1 Move the paper lever to the position marked "REAR." 32T-11.eps 2 Grasp the tabs lift off the paper separator. 3 Pull up on the lock levers and open the tractor covers. Then, move ...

...cover open close 1st side cover,how do i clear the massage. pliz help me. 1st Side cover is front cover.The cover which you use to open to install or check toner bottle.When you close that cover and ...

...Close cover and press ok." I closed every cover and pressed ok but still shows that error. The two covers on top are just not aligned properly. Open both top covers (one opens to the right one to the ...

Close top cover The printer has an error saying close top Cover. The cover is closed. What to do? Start by trying this. Open the cover and look around for openings in the where the cover closes. In ...

CLOSE TOP COVER TO CONTINUE TOP COVER IS CLOSED BUT RED INDICATOR LIGHT IS STILL FLASHING THEREFORE NOTHING WILL PRINT! 1. The top cover hinges are not connected to the ink slider bar properly. - Open

close ink cover" " please close ink cover" what is this mean? i'm using DCP-195C brother printer?how to fix it? it said "close ink cover". might be not properly covered or maybe your printer

...Close the cover. Unplug and replug your printer into the power source. When the printer turns on completely, reinsert your cartridges. Check if error appears again. (Error: 'Cover open, please close ...

...close cover - when cover is closed - will not scan copy or fax at all --close cover ---means the lower base of the printer is open the cover you open when to remove or insert the cartridges.that is ...