Question about OKI B Office Equipment & Supplies
...COPY SEEMS TO BE MADE BUT CAN'T GET OUT OF THE EXIT Jam may not be completely cleared or paper is not suitable for your printer. You can find your User Guide, an Educational Guide on the paper which ...
Question about OKI B Office Equipment & Supplies
The printed copy comes from bacK of the printer not front. How do i change it. Push in the paper guide/tray in the rear and pull out the one in the front (where there are the arrows)
...copy The Head is the Black ber on the uder side of the top cover. Use a tissue to wipe off any excess toner. You can use a small amount of alcohol on the tissue to than wipe dry. If you have a 3M ...
...not the front. How do we change it back so the final copy shoots out the front of the printer? Look at page 12 of the manual that can be viewed here: http://my.okidata.com/PP-B4350.nsf?opendatabase ...
...print density setting is set too low. Adjust to higher density printing. If the ink of the toner is not well distributed, remove the cartridge toner from the printer. Shaking it to redistribute toner ...
...copy lamp does not turn on. Cause Copy lamp abnormality Copy lamp harness abnormality CCD PWB harness abnormality. Check and remedy Use SIM 5-3 to check the copy lamp operations. When the copy lamp ...
Question about Toshiba Office Equipment & Supplies
...copy lamp does not turn on. Cause Copy lamp abnormality Copy lamp harness abnormality CCD PWB harness abnormality. Check and remedy Use SIM 5-3 to check the copy lamp operations. When the copy lamp ...
Question about Sharp Office Equipment & Supplies
...copy lamp does not light up. Cause Copy lamp error Copy lamp harness abnormality CCD PWB harness abnormality Check and remedy Check the copy lamp (SIM 5-3) When the lamp lights: Check the harnesses ...
Question about Office Equipment & Supplies
...Copy ... Time 30 Sec Zoom 50-200% Duplexing Not supported Multiple Copies 1-99 Copier ... Can I make multiple copies of the same DVD? - DVD-Cloner www.dvd-cloner.com > DVD-Cloner Knowledge Base Of ...
not copy at the same time. Is your printer printing OK? So you should be able to copy as well. Press COPY button when the printer is ready. Basically, you have the Copy (Black) and Copy Color options.
141 questions posted
Usually answered in minutes!
111 Questions
28 Questions
50 Questions
30 Questions
29 Questions