...manual tray to eliminate a problem with the standard paper tray. If it still jams it is very possible that your fuser has an issue and will require replacement. Are there any errors in the error
...once. Setting on printer's control panel must be set to card/heavy paper type on manual bypass tray Their may still be some card in fuser causing jams. Please rate as FIxya or post back, Cheers S.
...paper jams which I cleared machine insisted that paper jam still existed - I turned machine off for some time and when I switched back on this error message appeared - my laptop also initially ...
jams at the paper tray feed, but this is subsequent to the other jam and both can be cleared. I have cleaned the unit, changed out the fuser, and changed out the transfer belt. None of my "fixes" work
paper jam we have a Lexmark C762 that persistently jams. two pages feed and are stuck. The lead page never quite gets to the fuser. It stops about an inch short of entering the fuser. I've removed and
Question about OKI C Office Equipment & Supplies
...paper jam was in the fuser and I removed it, but now all the lights are flashing 2 times a second. Manual says to call for support. This is a new printer. I have only printed about 15 pages on it. i ...
...paper tray and looked in there and also taken out the colour cartridges and fuser cartridge out but to no avail. Not sure what to try next. Try to force a sheet into the feeder in order to clean and ...
Question about OKI C Office Equipment & Supplies
paper jams. To replace the fusing unit is not hard to do. For the most part taking the covers off the machine and getting them back on is the hard part... Let the fuser unit cool down before you touch
...paper with the Sharp AR153E, but it frequently jams when I do so. It almost always jams at the fuser assembly. It also jams when I print a lot of pages (10 or more at one time). Technician says that ...
Question about Office Equipment & Supplies
...paper jams with curl foldings in cartridge bank area..before entering the fuser assmbly..# Teflon sleeve not rotation properly due to this paper not passing through it result curl foldings..Replace ...
26 questions posted
Usually answered in minutes!
172 Questions
152 Questions
147 Questions
126 Questions
93 Questions