OKI C5100n Laser Printer "set drum" Questions

drum, these can get toner on them and not make proper contact, each set of 3 pins just pop out with the help of a flat blade, out of base to be cleaned. in yout case just switch the set under the cyan

...pages. This information can be found on the information menu map. Information Menu MenuItemDefault Setting PRINT MENU MAPEXECUTEPrints the MenuMap (menu listing) with current settings shown. ...

drum set from an OKI c5250 in an OKI c5200 Putting a drum from my OKI 5250 in my OKI c5200 gives: missing drum While the drum units may appear the same, chances are Okidata puts a different chip on it

...Also are they set lower than needed for maximizing of drum or toner sales? I would prefer to change toner and drum when the quality goes down. You must replace a fuse in this model to reset the

...Cyan, M indicates Magenta and Y indicates Yellow. Go to the USAGE MENU and look at the K DRUM LIFE setting. This will be a 2 digit percentage value. As you have just seen the message appear this

...drum is refillable try to buy toner that compatible to the model of your printer, else replace with new set assembly and there is a guide on how to refill or replace it. it can be found in printer ...

Drum re-set Fuse ? Oki C3200 Drum reset fuse . . . what value should I use? is this still current?

...encountered the problem last week, although the problem then was that the black ink was not setting. Color images looked good, but the black was smeared. I replace the black toner cartridge, ...

...drum, this will create more problems with print quality. Please try the steps provided on the link below. http://bitly.com/pnWPRY also try the steps below. Verify if media is supported and proper ...

...Set your voltmeter to the lowest amp setting. I put mine on 200micro amps. Also make sure your voltmeter leads are in the correct holes of the voltmeter. You want the amperage or milliAmp holes not ...