Question about OKI C Office Equipment & Supplies
...Image Drum Up/Down Process is not working properly. The errors are as follows: 140 - Yellow Drum Up/Down error 141 - Magenta Drum Up/Down error 142 - Cyan Drum Up/Down error Resolution: 1. Reseat the ...
image drum Does anyone know how to reset an OKI c3530 image drum? Turn off the printer Turn the printer on whilst holding down Menu button. (Display says user maintenance.) Press the menu button three
...image, there is a band of yellow at the top about 6mm high, and a band of purple (not cyan) at the bottom about 6mm high. It seems that the yellow printing LED array is printing offset. I've verified ...
changed any of the consumables you should do the following: 1. Clean LED head with lens cleaner or soft tissue. Remove the toner cartridge and give it a few shakes then reinstall it.The Toner Could be
Question about OKI C Office Equipment & Supplies
...a Magenta streak down the whole left side of the paper, what is causing this? I changed all cartridges to make sure and still the same result. More likely the magenta imaging drum than the
...image, there is a band of yellow at the top about 6mm high, and a band of purple (not cyan) at the bottom about 6mm high. It seems that the yellow printing LED array is printing offset. I've verified ...
changed any of the consumables you should do the following: 1. Clean LED head with lens cleaner or soft tissue. Remove the toner cartridge and give it a few shakes then reinstall it.The Toner Could be
...drum unit is the likely culprit, but you can probably get a good idea based upon what consumables have been changed recently. The only other potential cause that springs to mind is that something in ...
image drum, and make sure the blue lever is pushed ALL THE WAY toward the back of the printer (fully locked position). If it is not fully closed (locked), a "toner sensor" or "toner empty" message may
...drum is where the image is applied before being transfer to the paper. If the drum is wearing down the image will become poor. Changing the drum unit will make the image like new. So, yes you can run ...
82 questions posted
Usually answered in minutes!
172 Questions
152 Questions
147 Questions
126 Questions
93 Questions
