Pioneer PureVision PDP-5030HD 50 in. HD-Ready Plasma Television "blue flashing led plasma" Questions

...blue led flashes Was watching and a load pop noise then no picture or audio. blue led flashes four times and then repeats.  sound like mine,the two power clips have gone,midle panel to left,need ...

...blue the screen stopped working. My TV is in two pieces. The plasma monitor and the box. The LED lights go from just solid red on the standby mode, to flashing red on the rec timer mode, and now are ...

...LED GOES GREEN OR BLUE FOR A SPLIT SECOND AND AT THE SAME TIME THE SCREEN WILL FLASH AND THE LED GOES RED AGAIN. CAN'T GET TV TO TURN ON. Power supply board is dead,replaced the power supply board ...

...Blue LED Flashing for Pioneer PDP-R06G My Media Receiver PDP-R06G turned on and then off, followed by Blue LED flashes of 8 times. The Plasma unit concurrently switches off. Any solution to this? ...

flashing red green blue white when I power on my tv the screen just flashes red green blue white LCD panel fault. If you wish to get some details; check the site linked here. Pull up older posts. http

BLUE LED COMES ON. THE RELAY CLICKS 2X THEN THE BLUE LED GOES OUT WITH A CLICK OF THE RELAY AND THE RED LED FLASHED AGAIN 1X ALSO WITH A RELAY CLICK. NOTHING ELSE HAPPENS. I TRIED A POWER SUPPLY BOARD

blue LED flashing. Is there a simple fix for this? charlie the proble has something to do with the tv guide here is a response from an older post Un plug the power to the Plasma Screen and also to the

flashing twice Would like to know if this is due to capacitor problems on the power board when I push the power button the blue LED comes on and the TV has picture and sound for approx 15secs to 30min