Pioneer PRO-1009W 57" Rear Projection Television "select programmable" Questions

programme out remote. http://www.urc.philips.com/ Please follow the below instruction. 1.Location 2.Select your remote 3.On your left side you will have an option called as REMOTE CONTROL CODE FINDER.

Hi I just bought a Wharfedale DTR250 twin tuner HDD. How can I connect it up to be able to record sky programmes? On my old VCR all I did was set the VCR to EL1 and the selected Sky programmes ...

to set up hd antenna. I plugged into the back but don't know how to set it up. Go into the menu and select antenna and do auto programm

...up screen picture, audio, time but skips on tuning into progs and goes to options. Please help. Hi, Select TV as input source by TV remote or push Channel button on remote then go to TV Menu. That ...

...control window. The parential contro default code is 0711. There you can see the option "Reset". Select it, and press enter. All the channels and programmes will be reset to Factory settings. you ...

...masking tape and taping it to the back the TV for future reference To reset the lamp counter, press SELECT (or the button in the middle of the direction arrove buttons). Hit SELECT a second time to ...

...remove antenna cable from rear of TV Restore power to TV (you will have no picture obviously) then select from the remote control MENU - SETUP - AUTO PROGRAMME and run the auto programme, this

...select the Picture-in-Picture sub-menu, I am still unable to cursor up or down in it. I have programed a Comcast universal remote to control the TV, but have not found any way that it can access or ...

My PVR has retuned (DSO)to the wrong transmitter. I receive signals from the Winter Hill transmitter and live in SW Cumbria. My Humax 9200T has retuned ok but my older 8000T has retuned to a ...

...the Freeview box to your TV with a SCART cable via the SCART connectors on both. You need to select the AV input on the TV using the remote. Even if you do have an "expensive" box that does ...