Pioneer SD-643HD5 64" Rear Projection Television "fuse blowing" Questions

Ad

Question about Televison & Video

1 Answer

...fuse keeps blowing on my 1996 RCA Big screen tv? Most likely there was a power event (surge, brownout, ect) that caused the power supply to fail in the TV causing the fuse to blow. you will need to ...

Ad

blowing a fuse. Everything was working well last night then it blew the fuse I replaced it and it blew again. On these sets if you replace a fuse either you have a short OR the fuse is a generic one--

Ad

Question about Televison & Video

1 Answer

fuse is blowing because power suger/or bad flyback/hozoutput/or power supply whent bad. unplug the tv .take off the back and look for the fuse you see the power cord it by the powercord if the fuse is

Question about Pioneer Televison & Video

1 Answer

...blowing the 5 amp fuses in the back of the tv. The tv goes to standby and won't turn on, this started happening a while ago found out it was the was the fuses. The fuse would last usually a couple of ...

Question about RCA Televison & Video

1 Answer

...fuse keeps blowing out... Any suggestions??? Well you could always use a bigger fuse but I would not advise to do it, it could and most likely will blow tv not fuse. Fuses ussually blow from a short ...

...blowing the fuses. Is there something i can do Okay. now what you have to do is plug one crt back in and try it if the fuse doesnt blow then plug in the second CRT and try it again. then if it still ...

Question about RCA Televison & Video

2 Answers

What blows the fl231 fuse. On the RCA D52w23 TV? Replacing it makes the convergence okay until the fuse blows again in about 10-20 minutes. Bad solder joints on the IFT. Replaced fl231 like you said ...

Question about RCA Televison & Video

1 Answer

blowing fuses p50830bl when i unplug the upper board it doesnt blow fuse when i plug it back in ut blows the fuse the board mounted overtop the of the chasis is the convergence power supply board ...

...fuse blowing if it is the power supply? What should I look at next? Hello rmolen, This is an indication that the convergence amps are drawing too much current which has an effect on the power supply ...

Question about Televison & Video

1 Answer

fuse blows when plugged in replaced the fuse and plugged in the tv and the fuse instantly blows I assume it's the fuse in the TV that blows.  You more than likely have a bad or shorted low ...

Not finding what you are looking for?
Pioneer SD-643HD5 64" Rear Projection Television Logo

107 questions posted

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...