...ohm selector switch on the back. Thank You Gotta be careful here....the headphone output won't drive a speaker - if you already have all other speakers connected on the back as designed, you really ...
Question about Sony Audio Players & Recorders
...front of the receiver actually says Str D515 but the site wouldnt let me pick that... This product was bought used about a year ago - it worked fantastically with the exception of the phono in port. ...
Question about Onkyo Audio Players & Recorders
...speakers up to this receiver as follows. Front: Bose Acoutimass 3 series IV impedance between 4-8 ohms per Bose CS No set impedance Center: Bose V10: 6 ohms Rear: three ceiling installed speakers all ...
Question about Audio Players & Recorders
...front are 8 (whatever that symbol is) and the speakers in the back of my room are 3 (whatever that symbol is) thanks guys i hope this info is good enough for u to help me. The speaker impeedence The ...
...ohm spec. http://www.use.com/PIONEER_767cb5bb4ea6f30a06fc?p=7#photo=9 http://www.use.com/showorig.pl?set=767cb5bb4ea6f30a06fc&p=6 The JBL's would work best as primary front speakers. ...
...speakers; and reconnect and test them one at a time (at relatively low volume.) For example, reconnect the left front speaker, test the system; THEN add the right front, test the system,and so on, ...
...speakers; and reconnect and test them one at a time (at relatively low volume.) For example, reconnect the left front speaker, test the system; THEN add the right front, test the system,and so on, ...
...speakers; and reconnect and test them one at a time (at relatively low volume.) For example, reconnect the left front speaker, test the system; THEN add the right front, test the system,and so on, ...
...speakers; and reconnect and test them one at a time (at relatively low volume.) For example, reconnect the left front speaker, test the system; THEN add the right front, test the system,and so on, ...
Question about Yamaha Audio Players & Recorders
...Front R&L, center, R&L rear speakers and for the sub-woofer jac? Is it possible to do this conversion and will my SONY 3 ohm impedance speakers work well with the RX-V465 receiver? Can you ...
5 questions posted
Usually answered in minutes!
169 Questions
146 Questions
83 Questions
90 Questions
66 Questions