Pioneer VSX-406 Receiver "tv input" Questions

...TV has HDMI input connect as follows: 1. Connect an HDMI cable from the Directv box to an HDMI input on the Denon. 2. Connect an HDMI cable from the HDMI out-put on the Denon to the RCA TV 3. Select ...

...TV has HDMI input connect as follows: 1. Connect an HDMI cable from the Directv box to an HDMI input on the Denon. 2. Connect an HDMI cable from the HDMI out-put on the Denon to the RCA TV 3. Select ...

...TV input, Coax IN and OUT or AUX input (I don't remember if this model had HDMI). On the back of your TV, there should be an AUDIO OUT, connect this to either the TV or AUX inputs and make sure on ...

...tv input you use, such as coaxial, RCA, you note and put tv input setting on the device that you are going to use. If you have the audio working on each device, check the video input for each device. ...

...INPUT TO VCR2 If your tv has output jacks! red/white/ you can get a set of audio cables and run them to the red/white audio input on the back of your amp in either the tape input or any other free ...

...input button on the tv one time, then wait 5 to 10 seconds for the tv to recognize the input signal. If nothing, press again. You don't say which tv you have but many newer models have 5 to 7 input ...

TV to any available audio input terminals on the Yamaha receiver, other than the phono input. You can use any analog audio Left (White) and Right (Red) inputs on your receiver such as the DTV/CBL, SAT

...TV and the "AUX INPUT" on the receiver. I don't see anything labelled "AUX INPUT" on the receiver - could I use the "PHONO IN" holes? If not, how do I hook this up? Take the audio outputs on the TV ...

...TV audio, you must select the Tape or Sat input on the receiver. Do not send more than one signal to a set of inputs on the receiver. Typically, a CD, DVD and Sat inputs offer two or more of the ...

I think you can disable this by either disabling the HDMI Controll functions or better by renaming the AV1 input to something other than "TV". Renaming input is well documented in the receiver manual