...rt2760 and i was wondering if i needed to have the subwoofer control plug to hook-up a subwoofer to it Yes it has to be hooked up or subwoofer will not power on when on is pressed on the
...hook up a passive subwoofer from my old sony dream system. The connection on the receiver is an rca, and the one on the subwoofer is the two lead terminal. The subwoofer works on my old sony dream ...
...HOOK UP MY SDAT 8' POWERED SUBWOOFER TO MY HTR-5740 RECIEVER???? You need a long enough subwoofer cable ( Male connectors on each end ) and connect it to the female RCA input on the sub and ...
...SUBWOOFER IS USELESS AND PUT THERE FOR YOU TO HOOK UP AN AMP FOR A SUB WOOFER. EVERYTHING HAS SHORT COMINGS, AND THAT'S THE ONE FOR THE AX-720. The RCA output for the subwoofer is for a powered ...
...powered subwoofer and hooked it up to the sub pre-out using a single rca cable, ran the auto setup and the test tones came through the subwoofer, but no sound comes through the subwoofer when ...
Question about Sony Audio Players & Recorders
...hook this up to a Sony hi-fi stereo? I tried connecting subwoofer cables to my Sony lbt-gtz4i,but I heard no sound. I would try going into the menu settings on your receiver to make sure that the ...
HTR-5740 Subwoofer Hooking Up Issue I have a HTR-5740 yamaha receiver, it has the subwoofer where you have to have RCA cable for it to work, but I have multiple different subwoofers, that have speaker
Question about Onkyo Audio Players & Recorders
...This receiver has direct subwoofer amplifer for a passive (unpowered) subwoofer as well as a Subwoofer Line Out for controlling an active (powered) subwoofer
Question about Pioneer Audio Players & Recorders
hook a powered subwoofer up to a VSX-D903S is if your subwoofer is equipped with amplified/speaker level terminals on the back, in addition to the line-level input. If you only have a line-level input
Question about Pioneer Audio Players & Recorders
hook up a Kenwood subwoofer to a pioneer receiver It depends on the speaker and receiver inputs/outputs. If The speakers have bare wires, and the receiver has spring clamps, you are in luck! Check out
90 questions posted
Usually answered in minutes!
169 Questions
146 Questions
83 Questions
90 Questions
66 Questions