Pioneer VSX-D608 Receiver "tech 1" Questions

...1/Analogue all other devices that are required to play the sound are switched on at the time. You have a serious problem ewsith it that only a trained tech will have to figure out, Good luck, I would ...

...1-2 seconds then shuts off The receiver is going into protection mode. Try removing all connections i.e. source inputs and speaker connections. If the problem still continues your problem is internal ...

...this, (1) a driver in your speaker is going bad or a output IC/transister is going bad. Being a tech I have seen devices that operate fine at low to moderate levels but would fail when driven

...1 inputs connected. Prior to moving, I discovered the right rear channel not functioning (I noticed the right rear speaker problem after a Direct TV installation tech switched out my Direct TVR. I ...

..."Tape 1", selected "Tape 1"...no sound. I've tried the tuner, T.V., everything, but nothing seems to get sound. If it's under warranty..get a new one. It's an internal breakdown ...tech service

...1 watt resistors. I ordered these from a supplier on Amazon for a few dollars, and just snipped the old resistors off, leaving the soldered leads sticking out. I then thinned the new leads and ...

...tech savvy, so a detailed description would be most helpful. Thanks in advance. FIX ZONE @ SOUND - STUCK ON "ZONE 2 - FIX" 1. Press "Amp" button (right side of remote - 1/3 way down) 2. Press "Menu" ...

...1 etcetc. I guess there is a battery/capacitor for the flash-ram which is faulty but i can't find it. Please help me out, thanks! Most of these HK receivers have a 3.6v rechargable battery on the ...

...tech sh 8020 eq to a sansui 5500 and a marantz 2220b Generally, Outputs to Inputs, using one of the tape monitor loops (for example, Rec-1 / Mon-1) or Noise Reduction Adapter (same type of thing). ...