...couple of seconds, then turns off all by itself. I'm concerned it is not coincidental that this is happening after some severe thunderstorms rolled through a couple of days ago. Help? I'm having the ...
Question about Yamaha Audio Players & Recorders
couple of seconds later, again and then nothing else happens (and the power does not turn on). It used to make the first click, then a couple of seconds later another click, then the amp would turn on
Question about Audio Players & Recorders
Why does my receiver turn on for a couple of seconds, then turns off and won't turn on again? what brand/model? Most likely there is a short in the amp that will need to be repaired
Question about Audio Players & Recorders
...turns on for a couple of seconds then turns off for approx. five minutes. When I try to make a call, there is a deafening static sound. What is the problem? Your amp can be hooked up to a telephone
...on for a couple seconds and then turns off. i took out the fuses and its stays on, but emits no sound. what could that be? Make sure that your speaker wires are not touching and setting off the
Question about Pioneer Audio Players & Recorders
Turns on for a couple seconds and then it says power off and shuts down,what could be doing this? Try disconnecting each speaker one at a time and see if the amp turns on normally. If it does then you
won't stay on I have had it for at least 3 years and never a problem, now I turn it on and in just a couple seconds it shuts off. The audio amplifier IC fried need to be replaced
Question about Insignia Audio Players & Recorders
...couple of seconds after turning it on. This happens because of internal overheating - clean the air vents and if you have covered the receiver with a cloth please remove the cloth your problem could ...
...couple of seconds, is off for a couple of seconds, on for a couple of seconds......continuously. Any ideas? We are using a Harmony 890 remote control to operate all of our devices, but this problem ...
...for about five seconds. Most likely the unit is locked in protect mode. If it powers on but turns back off after a couple seconds, you probably have a blown amp channel that needs to be ...
34 questions posted
Usually answered in minutes!
169 Questions
146 Questions
83 Questions
90 Questions
66 Questions